Boats are designed by our Naval Architect Jon Pattie of Sealife Design at Hemmant Brisbane.

All our boats feature the same under floor sub frame of four full height full length longitudinal girders and full height cross frames, which all interlock to form a ridged frame work which is then fully welded. There are two air tight bouncy tanks one either side of the hull. On our fully 2C marine surveyed boats there is also under gunwale and transom foam bouncy fitted.

The 4.8m, 6.3m, 7.5m boats are constructed from 5083 aluminium sizes are 5mm bottom plate, 4mm chine plate, 4mm side plate, 5mm transom, gunwale 3mm, main decks 4mm, 3mm longitudinales and 3mm frames.

8m and 8.6m boats use 6mm bottom plate and everything else as above.

All the boats have been designed to Class 2C marine survey and are inspected by Brian Doherty of "Doherty Pennel Agencies" during construction of all boats.

Painting is optional and is done by Reflection Marine Services of Hemmant, and is done to a very high standard of finish.

Graphics are done by Chris of Boat Names Australia.